Ball Prediction - Shows where the ball is going, allowing you to set up for aerials easily and wall-shots. It can also indicate if the ball is going into a goal, allowing you to make easy saves.
Prediction Only In Goal - from a forum suggestion! ( enable | disable )
Enabling this feature will make the prediction draw only when the ball will go into a goal in red color. This feature was suggested by .
Prediction Type ( 0 - 1 )
Selecting 1 will use a custom prediction, which is more accurate in some cases, but will use more FPS ( frames per second ). This feature will be improved further on.
Selecting 2 will use the game's own ball prediction.
Intersection Point ( enable | disable )
This feature will draw a point on the prediction line showing where an intersection between the player and the ball will happen.
Intersection Type ( enable | disable )
Allows you to change the intersection point drawing.
Selecting 1 will show a circle.
Selecting 2 will show a rectangle/box
Line Width ( 0 - 10 )
Change the width of the prediction line between 0 and 10. Higher values will use more resources. A recommended value is 3.
Colors
Lets you choose a custom color for both the Prediction Line and Intersect Point
Fade Out Line ( enable | disable )
Enables fading out the prediction line.
Iterations ( 20 - 200 )
Controls the number of the prediction iterations, which also controls the length of the line. Higher value will use more CPU resources. Recommended value is 120.
Boost Timers - Can show the remaining time of boosts and can also draw circles around them.
Show Circles ( enable | disable )
Enable or disable the showing of a circle on boosts that have been taken for easier seeing.
Show Text ( enable | disable )
Enable or disable the showing of the time remaining time on boosts.
Text Lowering ( enable | disable )
Enables lowering the position of the timer text by distance.
Font Size ( enable | disable )
Allows you to specify a font size for the boost timers.
Show Rumble Items ( enable | disable )
Can show the current item a player has in the game mode Rumble and also the time ( buggy on Psyonix's side ) til next item.
Boost Display Draws a bar on player's position indicating their current boost amount.
Show On Team( enable | disable )
Enable or disable the showing of your team's current boost amount.
Show On Enemy ( enable | disable )
Enable or disable the showing of your enemy's current boost amount.
Show Bars ( enable | disable )
Enable or disable the showing of bars over players. This feature was suggested by
Show Numbers( enable | disable )
Enable or disable the showing of the current boost amount with numbers.
Persistent Background ( enable | disable )
Enable or disable showing the boost information always.
Background Type ( enable | disable )
Selecting 1 will use borders for background.
Selecting 2 will use a filled background.
Colors
Lets you choose a custom color for the background.
Chat Messages On Players - Can display player's chat messages over their cars while in-game. Both for the enemy and your team.
Show Enemy Messages ( enable | disable )
Enable or disable the showing of your enemy's messages.
Show Team Messages( enable | disable )
Enable or disable the showing of your team's messages.
Team Colored Messages ( enable | disable )
Enable or disable the coloring of the messages based on the current team they are on.
Chat Window ( enable | disable )
Enables a chat window, which logs the last 10 available chat messages.
Chat Window Auto-Scroll ( enable | disable )
Enables auto-scrolling in the chat window.
Wave Dashing ( Default hotkey - Left ALT )
By holding the hotkey button in-game, jumping manually, this feature will attempt to orient your car based on your current velocity and where the car will land, and will jump in order to cancel the forward dashing animation.
This feature is mostly useful after jumping from a wall for quick acceleration.
Continuous Mode ( enable | disable )
Enabling this feature will make continuous Wave Dash jumps.
Orient Only ( enable | disable )
Enabling this feature will prevent the bot from jumping, useful if you would like the bot to only recover for you.
Orient Towards Ground ( enable | disable )
Enabling this feature will orient the car towards the ground when above a certain height for faster recoveries, requires to have boost amount bigger than zero
Wall Dashing / Infini Dash ( enable | disable )
Enabling this feature will make the bot do continuous Wave Dash jumps on walls, useful for quick boost in speed.
Legit Wall Dashing ( enable | disable )
Enabling this feature will make smart usage of the Wall Dash jumps only when needed to reach maximum speed.
Demolition Bot ( Default hotkey - Left CTRL )
By holding the hotkey button in-game, the bot will steer the player's car into the closest enemy position.
Auto Boost ( enable | disable )
Enabling this feature will make the Demolition Bot use boost on its own, based on if we have enough boost, if we can reach the target with our current boost, and based on time it will take to reach the target. This feature also tries to keep the current speed, so we don't lose supersonic momentum.
Always Boost ( enable | disable )
Enabling this feature will make the Demolition Bot always use boost by ignoring all conditions.
Air Control ( enable | disable )
Enabling this feature will make the Demolition Bot orient the car also while in the air. Useful for air bumps. Not thoroughly tested
Custom Target ( enable | disable )
Allows choosing a custom target, also shows player's stats so you can choose a better target to demolish!
Aerial Bot BETA
Enabling this feature and while holding the hotkey button, the Aerial Bot will try to orient the player's car into the closest intercept position.
This feature is under development and may not work as expected. Default hotkey is F.
Aerial Modes
choose one of the 8 aerial modes.
Always FreeStyle
Will always do a spinning orientation that also tries to re-adjust in the air. The further you are facing the target, the more it will spin.
For more advanced users. *Requires boost feathering skills*.
Alternate FreeStyle
Will do an alternate version of freestyling which does a more controlled spinning orientation that also tries to re-adjust in the air.
Alternate FreeStyle 2
Will do an alternate version of freestyling which was used in an older version, v.2.2.0. Requested by .
Normal FreeStyle
Will do a more controlled spinning orientation only when needed to re-adjust. This is the recommended mode if you want to be free styling.
Normal Aerial
Will do a normal orientation, without any spinning re-adjustments
Mixed Normal Aerial
Will do a mixture starting with Normal Aerial mode and will finish with Strict. Useful for better scoring goals.
Strict Aerial
Will do a more strict aerial orientation, without any spinning re-adjustments.
Upside Down Aerial
Will do an upside down orientation, without any spinning re-adjustments
Flip Resets
Will try to go under the ball in order to reset the flip. This feature is mostly for fun.
Intersection Type
2 different calculation methods on finding an intercept target for the Aerial Bot.
Type 1 is newly added which allows to reach most shots and is better at scoring goals
Type 2 is the old method that was used in v3.0.2
Read the in-game tooltip for more information
Take-off Time
Allows you to specify at what time above the ground, the [Aerial Bot] should start free styling. Mainly used for when jumping off the ground in order to create a smoother Aerial.
Starting Velocity
Allows you to control how high (slower) or direct (faster) the Aerial Bot bot should fly towards the ball.
FreeStyle Control
Makes the Aerial Bot stop spinning until a certain distance. Only works for FreeStyle modes
FreeStyle Control Orientation
Allows you to specify which orientation mode the FreeStyle control should use
FreeStyle Until Distance
Allows you to specify the distance, in which the FreeStyle control should stop spinning
Aim At Goal BETA.
Enabling this feature, the Aerial Bot and the Auto Drive features, will try to position the car in order to hit the ball towards the center of the enemy's goal.
This feature is heavily under development and may not work as expected.
Facing Goal ( enable | disable )
Enables Aim At Goal only when the player and the ball are facing the enemy goal.
Safety Zone ( enable | disable )
Disables the Aim At Goal feature when the intersect point is not inside a specified distance
Safety Zone Distance ( 500.0 - 10000.0 )
Specify a distance in which the intersect point has to be, for the Aim At Goal feature to be disabled
Automatic Correction Values ( enable | disable )
Enables dynamically setting the values based on how close the player is to the intercept point. Disable to allow manual editing
Automatic Correction Usages
Allows the user to specify a condition when Aim At Goal feature should be used:
- Use When on Ground
- Use When Normal Aerialing
- Use When Freestyle Aerialing
On Ground
Controls how much we correct for being off-vector when the car is on the ground. Lower number = closer to the ball's center
Normal Aerial
Controls how much we correct for being off-vector when we are using the Normal Aerial Mode. Lower number = closer to the ball's center
FreeStyle Aerial
Controls how much we correct for being off-vector when we are using any FreeStyle Aerial Mode. Lower number = closer to the ball's center
Ground Risk Factor
Controls how much the Aerial Bot will risk trying to redirect the ball towards enemy's goal when the car is on the ground. Higher number = less risk taken. Lower number = more risk taken.
Normal Aerial Risk Factor
Controls how much the Aerial Bot will risk trying to redirect the ball towards enemy's goal when the car is in the air and using Normal Aerial mode. Higher number = less risk taken. Lower number = more risk taken.
Freestyle Aerial Risk Factor
Controls how much the Aerial Bot will risk trying to redirect the ball towards enemy's goal when the car is in the air and using Freestyle Aerial mode. Higher number = less risk taken. Lower number = more risk taken.
[info]Use the left click on the aerial modes to select multiple modes.
Default hotkeys are F for the primary selected aerial mode and G for the secondary selected aerial mode.
- If a mode has been selected, you can unselect it by clicking it again.
- The primary key will be always set to the first mode that is first clicked, then the secondary[/info]
Automation.
This feature is heavily under development and may not work as expected.
Auto Boost ( enable | disable )
Enables automated boosting.
Feather Boost ( enable | disable )
Enables automated feather boosting. This feature is experimental
Feather Boost Strength ( enable | disable )
Controls how much 'feathering' the Feather Boosting feature should you. Higher value = less feathering (more boost used)
Boost Till Distance
Allows the user to specify at which acceleration between the player and the intercept point, the bot should stop using boost.
Auto Drive ( enable | disable )
Enables automated driving towards the intercept point
Use Handbrake ( enable | disable )
Enables the usage of the Handbrake. Requires Auto Drive to be enabled
Drive Backwards ( enable | disable )
Enables driving backwards when the ball is behind the player. Requires Auto Drive to be enabled.
Dribble Match Speed ( enable | disable )
Enables matching the current speed of the ball in order to dribble it towards the enemy goal, it can catch, carry the ball on the car's roof and adjust it in order for you to flick it. Requires Auto Drive to be enabled.
It has 3 different states for now. Automated flicking will be implemented later on.
Catching State:
- Catching offset: Controls how far away the car should position itself to in order to catch the ball.
- Catching approach offset: Controls how direct the car should approach the position. (More direct or more angled approach)
Carrying State:
- Carrying offset: Controls how far away the car should position itself to in order to catch and redirect the ball towards the enemy's goal. The default settings are safer to use, but slower to redirect!
- Carrying approach offset: Controls how directly the car should take a path (more direct or more angled approach), approaching the position while it's carrying it on it's roof.
Adjusting State:
- Adjusting Offset: When the ball is on the car's roof, it will enter this state, adjusting the car's position in order for the user to manually flick it. The default value is for a basic front flip
Show Dribble State ( enable | disable )
Enables showing text, displaying the current state the Dribble bot is in.
Kickoff Bot BETA
Enabling this feature and while holding the hotkey button ONLY ( no other keys must be held ), the Kickoff Bot will try to perform a sequenced fast kickoff ( using an advanced speed flip mechanic ) maneuver towards the ball.
Each kickoff position has its own sequence and its own settings which can be modified, and improved further. The kickoffs settings are saved in a separate config file inside the WSA folder.
This feature is under development and may not work as expected. More updates will follow. Default hotkey is V.
[error]Does not work well in offline matches such as, training mode, exhibition match and local match due to an unknown reason. It is recommended to test it in a private online match versus a bot if you wish to modify it further.
If you experience problems with the beginning of the kickoff, such as the bot doing a speedflip wrong, try increasing this value until it stops happening in all 3 kickoff positions.[/error]
Position Alter ( 0 - 1400 )
Controls the position in which the kickoff bot will steer towards in the beginning of the whole maneuver. This value controls where the car will land.
The higher the value, the more the bot will steer to the side of the ball, the least the value, the more the bot will steer to towards the center of the ball.
Time 1 - 2 - 3
The Time settings allows you to specify how long it do a particular sequence for, before going onto the next sequence. Menu tool tips will provide some more information for each sequence.
Steer Value
The Steer Value setting allows you to specify how quickly should the bot steer the car towards the Position Alter position.
Speed Flip Dodge Time
The Speed Flip Dodge Time setting allows you to specify how quickly should the bot do a Speed flip. Having 0, should perform it almost instantly.
Jump and Dodge Into the Ball
This settings enables the dodging into the ball part of the kickoff sequence.
Save Boost ( only for some kickoff positions )
This settings enables a smart boost saving usage which only boosts when it's needed to achieve maximum speed. Recommended to have enabled on the Center position kickoff.
Use Boost ( only for some kickoff positions )
This settings enables a smart boost usage in order to keep maximum speed when the car is on the ground. Recommended to have enabled on the Center position kickoff.
Time Based Dodge
This settings enables a time specified dodge which will execute a dodge when the specified time has passed. Otherwise it will flip as soon as it touches the ball.
Double Jump Time
This settings lets you specify how long the bot should hold the jump button for.
Distance Till Jump
This settings lets you specify the distance at which the bot will initiate a jump.
Forward Dodge Value
This settings lets you specify how diagonal a side flip can be.
Handbrake Usage
Enables the usage of the handbrake while landing.
Mini map - Draws a mini map giving you more awareness on what is happening on the field. Showing you - car positions, ball position, boosts and their time remaining, and also player's messages.
Scale ( 1 - 3.5 )
Controls the overall scale of the mini map.
Position X
Allows you to change the X ( horizontal ) position of the mini map.
Position Y
Allows you to change the Y ( vertical ) position of the mini map.
Show Boosts ( enable | disable )
Enable or disable the showing of the available boosts on the mini map.
Show Boost Timers ( enable | disable )
Enable or disable the showing of the remaining time for the boosts on the mini map.
Show Chat Messages ( enable | disable )
Enable or disable the showing the chat messages on the mini map.
Show Mini map Borders ( enable | disable )
Enable or disable drawing the borders of the mini map.
Misc ( enable | disable )
Automatic Air Sensitivity ( enable | disable )
This feature automatically adjusts the air sensitivity control for the Aerial Bot. It is needed if you use air sensitivity of more than 1.0, anything above will cause the aerial bot to make mistakes.
Hide Nameplates ( enable | disable )
Allows you to hide the car's nameplates if you wish so.
Set FOV( enable | disable )
Allows you to change your current FOV ( Field of View ) above the limitation of 110. The higher the FOV, the more you are able to see on the field, and the higher advantage you will have.
Draw Hitbox ( enable | disable )
Allows you to see the actual in-game hitbox that the current equipped car uses
Jump Indicator ( enable | disable )
Will make the player's car red color when a jump is available.
Car Vision ( enable | disable )
Make all cars on the field see-through obstacles, such as the ball and through smoke ( demo explosions )
Boost Management ( enable | disable )
By enabling this feature, you allow the tool to assist you when boosting on the ground.
When the boost button is held down, the tool will cancel your boosting as soon as you reach supersonic speed of 2200 uu/s
This feature is useful to save boost
these its still undetect?